Every Heat Press is Different.
1. Preheat your heat press to 325-330 degrees Fahrenheit
2. Prepress fabric for 5 seconds to remove excess moisture
3. Place the DTF transfer print-side down onto your garment (Graphic facing you)
4. Apply high/heavy pressure for 10-15 seconds
5. Allow the garment to cool for 30 seconds before peeling
6. For best results, use a Teflon sheet or protective layer between the transfer and heat press again for 15 seconds.

Due to the many variations in monitors and browsers, colors may appear different on different monitors. Computer monitors are not all calibrated equally and color reproduction on the Internet is not precise.

Direct-to-Film (DTF) shirts are durable and easy to care for. Wash in cold water with similar colors, turning the shirt inside out to protect the print. Use mild detergent and avoid bleach and softeners. Tumble dry on low heat or air dry for best results. Iron on low heat if needed, placing a cloth between the iron and print. Avoid dry cleaning and excessive heat, which can damage the design. With proper care, your DTF shirt will maintain its vibrant colors and quality for years.

We are not responsible for items damaged or lost during shipping. If your order arrives damaged, please contact the carrier directly to file a claim.

We are not responsible for damaged transfers after you have pressed them. Please make sure you are knowledgeable on your heat press in regard to temperature, pressing pressure and peeling technique. This includes using non-commercial grade heat presses or irons to try and use our transfers.